Tavve zoneranger User Manual page 327

The
proxyMap add
text file. If no input file is specified, the active proxy map is used. If no output file is specified, the
resulting configuration is automatically copied to the active proxy map. Otherwise, the resulting
configuration is written to the specified file and the active proxy map is unchanged.
The
weight
relative to other ZoneRangers when choosing proxy map entries. Precedence is determined by the
lowest cost (0) value. The weight is only evaluated after there are no responsive ZoneRangers at the
current lowest weight.
proxyMap remove [–in input_file ] [–out output_file ] rg-address
indicates the name of the input file containing proxy map information
-in
indicates the name of the output file to write proxy map information
-out
rg-address
zoneranger
The
proxyMap remove
proxy map, or from an offline file.
The
rg-address
If no
zoneranger
If a
zoneranger
zoneranger
If no matching entries are found, the input configuration will be unchanged. The
subcommand can read input from the active proxy map, or from a specified text file. If no
remove
input file is specified, the active proxy map is used. If no output file is specified, the resulting
configuration is copied to the active proxy map. Otherwise, the resulting configuration is written to
the specified file and the active proxy map is unchanged.
proxyMap merge [–in input_file ] [–out output_file ] merge_file
indicates the name of the input file containing proxy map information
-in
indicates the name of the output file to write proxy map information
-out
merge_file
configuration
The
proxyMap merge
•
Add new proxy map entries.
•
Modify existing proxy map entries.
The logic for merging is similar to the logic for adding an entry. If the input configuration already
contains an entry with the matching
merged, the existing entry is replaced. Otherwise the new entry is added.
One way that the
the
proxyMap merge
pattern, the existing entry is removed, and the entry that replaces it is added to the end of the
configuration. As a result, the
pattern entries in a configuration.
ZoneRanger 5.5 User's Guide
subcommand can read input from the active proxy map, or from a specified
option must be a positive integer which indicates the weight of each ZoneRanger
[ zoneranger ]
specifies the IP address of the incoming request to the Ranger Gateway
specifies the ZoneRanger to which to send the request
subcommand can be used to remove one or more entries from the active
and optional
zoneranger
value is specified, all entries that match the specified
value is specified, only the entry that contains the matching
values is removed.
specifies the name of a file that contains a set of entries to be merged to the input
subcommand can be used to:
rg-address
subcommand differs from the
proxyMap merge
subcommand replaces an existing entry where
proxyMap merge
parameters specify the entry to be removed.
and
zoneranger
add
subcommand can rearrange the order of address
are removed.
rg-address
and
rg-address
proxyMap
to one of the entries to be
subcommand is that when
is an address
rg-address
327