Tavve zoneranger User Manual page 179

Configuring ZoneRanger ports
The Configuration > System page Ports tab is used to enable and disable various ZoneRanger
ports. Changing values determines how ports for the corresponding service respond.
Figure 34-65. System > Configuration page Ports tab
Each ZoneRanger port has multiple service options depending on the type of port. Below are
the service options:
Service Option
eth0 and eth1
disabled
Ranger Gateway
Only
eth0 only
eth1 only
ZoneRanger 5.5 User's Guide
Description
Enabled for both interfaces.
Port is disabled.
Port is disabled but service is still
accessible through joined Ranger Gateways.
This option is not available for all
services.
Port is only enabled on eth0.
Port is only enabled on eth1.
179