Tavve zoneranger User Manual page 143

If Auto Discover is checked for a service, the associated TCP port is tested on all discovered
nodes to see which nodes support the service. You can use the Configuration > Polling page
TCP Settings tab to manually add TCP ports to selected managed nodes, delete TCP ports from
selected managed nodes, and to enable/disable polling for specific ports on selected managed
nodes.
When a TCP service is deleted, all instances of this service are deleted from the ZoneRanger
database, and any TCP polling of the deleted service is stopped.
Configuring Device Types
The Configuration > Discovery page Device Types tab, provide a mechanism to map the
sysObjectId
switches.
Figure 34-31. Configuration > Discovery page Device Types tab
ZoneRanger can use the SNMP
sysObjectId
assumed to be of the specified type. After you add or edit device type mappings, ZoneRanger
does not update its device inventory until discovery runs again.
Forwarding
Using the Configuration > Forwarding page, ZoneRanger can be configured to listen for
traffic on specified ports, and forward the traffic through a Ranger Gateway to a specified
destination host and port that is reachable from the Ranger Gateway.
ZoneRanger 5.5 User's Guide
of discovered devices to a device type, enabling you to identify routers and
sysObjectId
of a device matches an entry in the Device Type Mappings list, the node is
of a device to determine its type. If the
143