Tavve zoneranger User Manual page 306

deviceGroup list
file. If no input file is specified, the active device group table is used.
deviceGroup
deviceGroup clear
table. When
device group table should be cleared. If the response is "y" or "yes" (case is ignored), the active
device group table will be cleared. Otherwise the active device group table will be unchanged.
If the -f option is specified, the user is not prompted.
deviceGroup config [ item [ value ]]
deviceGroup config
device group table.
The configuration items associated with the device group table are:
Item
device_group_cache_
size
If no item or value is specified, the values of all configuration items are listed. If an item is
specified with no value, the current value of the specified configuration item is displayed. If an
item and a value are specified, the value of the specific configuration item is set to the specified
value.
deviceGroup test [ address ]
deviceGroup test
active device group table that contain a specified address.
The primary difference between the list subcommand and the test subcommand is that the test
subcommand also checks to see if the specified address matches any of the automatically de-
fined groups (i.e. Local, ZoneRanger). In addition, the list subcommand can list entries from
offline files, but the test subcommand only lists entries from the Ranger Gateway's active de-
vice group table.
deviceGroup File Formats
The various deviceGroup subcommands that generate configurations (i.e. copy, add, remove,
merge) all generate configuration information in an XML format. An example of this format,
corresponding to the default Ranger Gateway configuration is as follows:
<device-group-list>
ZoneRanger 5.5 User's Guide
can read input from the active device group table, or from a specified text
clear [-f]
can be used to remove all device groups from the active device group
deviceGroup clear
can be used to display or modify configuration items associated with the
performs a query on the Ranger Gateway to list all device groups from the
<device-group name="group1">
<address value="10.1.2.*"/>
<address value="10.10.2.*"/>
</device-group>
<device-group name="group2">
<address value="10.2.2.1"/>
<address value="10.2.2.2"/>
is executed, the user is prompted to confirm that the active
Value
Determines the maximum number of
entries in the cache. Valid values are
positive integers in the range 0-
10000. The default value is 100.
306