Tavve zoneranger User Manual page 248

hostname2
Usage Guidelines
Command to determine the route using SNMP information between the two specified devices.
Example
This example shows how to find the route between zr1and node2:
forward
To add a forwarding rule to forward UDP data from the ZoneRanger to the indicated Ranger
Gateway. To remove a forwarding rule, use the no form of this command
Forward [ dest-group | log-level | netflow | generic | sflow | syslog | | syslog-options | trap ] op-
tions
no forward [ dest-group | log-level |netflow | generic | sflow | snmp | syslog | syslog-options | trap
] options
Syntax Description
dest-group
log-level
netflow
generic
sflow
snmp
syslog
syslog-options
trap
Usage Guidelines
Each of the forward commands will take effect immediately when executed. The syslog, trap
and dest-group clauses use configuration submodes to further define the forwarding rule.
forward dest-group group_name
no forward dest-group group_name
ZoneRanger 5.5 User's Guide
Hostname or IP address of ending device
zr# findroute zr1 node2
Destination Groups
Logging level for forwarding
Netflow forwarding rules
Generic forwarding rules
Sflow forwarding rules
SNMPv3 options
Syslog forwarding rules
Options for syslog forwarding
Trap forwarding rules
group_name
no
Destination group name.
Deletes destination group
.
248