Tavve zoneranger User Manual page 287

trap-filter
To add a trap filter to be used by trap forwarding rules. To remove a trap filter, use the no form of
this command
trap-filter filter_name
no trap-filter filter_name
Syntax Description
filter_name
Usage Guidelines
Trap filters are created within the trap filter configuration submode. Once you are in the trap
filter configuration submode, the following configuration commands are available:
condition agent ip_address_pattern
no condition agent ip_address_pattern
condition community string
no condition community string
ZoneRanger 5.5 User's Guide
tacacs TACACS+ proxy requests
threshold Threshold value for IP address
no Delete traffic configuration
.
Name of the filter.
•
all-conditions – All conditions must be true to pass filter
•
any-condition -- At least one condition must be true to pass filter
•
cancel - Exit this mode without saving any changes
•
clear-conditions – Clear all conditions
•
condition – Define a new condition
•
exit – exit server group mode (saving changes)
•
no – remove or use default settings
•
not – Negate a condition
condition
agent
ip_address_pattern
no
condition
community
string
Adds a filtering condition.
Specify agent condition
IP address pattern to match against trap agent
Deletes this condition
Adds a filtering condition.
Specify community string condition
String to match against trap community string
287