Tavve zoneranger User Manual page 262

ping address
Syntax Description
address
Usage Guidelines
Command to perform a diagnostic ping to a device.
Example
This example shows how to ping device node1.:
polling
To configure the ICMP and TCP polling intervals for managed devices . To remove a polling
setting, use the no form of this command
polling [ interface | tcp ]
no polling [ interface | tcp ]
Syntax Description
interface
tcp
Usage Guidelines
Each of the polling commands will take effect immediately when executed. The interface
clauses are positional significant. Thus each interface clause takes an optional index position
which determines its place relative to the other rules. The indices start at 1. If no index posi-
tion is specified, the rule is placed at the bottom of the list.
In the tcp service clause, the options must be specified in the order they are displayed.
polling interface ip_address_pattern interval timeout retries position index
no polling interface ip_address_pattern interval timeout retries position index
ZoneRanger 5.5 User's Guide
Hostname or IP address to ping
zr# ping node1
Configure the ICMP polling intervals
Configure the TCP polling intervals
interface Configure the ICMP polling intervals
ip_address_pattern IP address pattern to use for this polling rule
interval Polling interval in seconds
timeout Polling timeout in seconds
retries Number of retries after unsuccessful poll
position Position to place polling rule (optional)
index Index position of polling rule starting at 1
no Delete polling rule
.
262