Tavve zoneranger User Manual page 261

ntp proxy-server ranger_gateway ntp_server position index
no ntp proxy-server ranger_gateway ntp_server position index
ntp server-timeout timeout
no ntp server-timeout timeout
ntp validate-authentication
no validate-authentication
Example
This example shows how to add a NTP proxy rule to proxy NTP requests through gateway1
to an NTP server called ntpserver1.
ping
Perform a diagnostic ping from the ZoneRanger to an device.
ZoneRanger 5.5 User's Guide
none No logging (default)
short Message header is logged
full Entire message is logged
no Delete NTP log level
proxy-server Configure Ranger Gateway/NTP server pairs which will process
NTP proxy requests from Zoneranger managed devices
ranger_gateway Ranger Gateway through which to send proxy request
ntp_server NTP server to which to send NTP request
position Position to place NTP proxy rule (optional)
index Index position of NTP proxy rule starting at 1
no Delete NTP proxy server rule
server-timeout Amount of time a ZoneRanger waits for a message from an NTP
server
timeout NTP server timeout in seconds
no Delete server timeout rule
validate-authentication
no
zr# ntp proxy-server gateway1 ntpserver1 postion 2
Validate incoming NTP proxy requests with configured
keys
Disable validation
261