Tavve zoneranger User Manual page 229

Gateway Settings...SSH Proxy
The Gateway Settings...SSH Proxy window provides the mechanism to configure the SSH Proxy
settings on the Ranger Gateway.
Figure 35-20. Gateway Settings .. SSH Proxy Window
If the IP Address Aliasing mechanism is being used for SSH proxy, (see Chapter 28), the Ranger
Gateway must be configured to listen for SSH proxy requests on a configured port.
When SSH Proxy Enabled is checked, the SSH Proxy Port and SSH Proxy Destination Port
settings can be defined. The SSH Proxy Port field specifies the port on which Ranger Gateway will
listen for SSH Proxy requests. The default is 4822. The SSH Proxy Destination Port field specifies
the destination port which the ZoneRanger should use when sending SSH proxy traffic to managed
devices. The default is 22.
Gateway Settings...Status Traps
The Gateway Settings...Status Traps window can be used to configure the Ranger Gateway to
send status traps to a specified destination address and port.
ZoneRanger 5.5 User's Guide 229