Tavve zoneranger User Manual page 146

Log Level
None
Short
Full
This Forwarding log can be downloaded by the
Gateway. The log file may also be viewed on the View > Service Logs page. The log file is
called /log/udpFwd.log .
Configuring destination groups
The Configuration > Forwarding page Destination Groups tab provides the ability to create
destination groups, which are a named set of rules comprised of Ranger Gateways or Data
Diodes and the ultimate destination for UDP datagrams. Destination Groups are a mechanism
to more concisely organize multiple forwarding rules with the same set of destinations.
Figure 34-33. Configuration > Forwarding page Destinations tab
Each destination group is comprised of a set of rules. Each rule is comprised of a Ranger
Gateway or Data Diode and the hostname or IP address of the ultimate destination of the UDP
datagram. Destination groups may also contain other destination groups. Once a destination
group is created, it will appear within the drop-down on the Forwarding Rules tab.
Configuring trap filters
The Configuration > Forwarding page Trap Filters tab provides the ability to create trap
filters, which are a named set of conditions for matching traps. ZoneRanger uses trap filters as
the filtering criteria for forwarding traps in forwarding rules.
ZoneRanger 5.5 User's Guide
Description
Logging is off
Message header or length is logged
Entire message is logged
command on a Ranger
downloadFile
146