tacacs_key
no
Example
This example shows how to create an access control server group using a TACACS+
server for authentication:
arp
Perform a diagnostic arp from the ZoneRanger.
arp
Usage Guidelines
Command to perform a diagnostic arp.
Example
This example shows how to issue arp:
discovery
To configure the discovery settings on a ZoneRanger. To remove a discovery setting, use the no
form of this command
discovery [ auto-manage | auto-poll | exclude-network | ignored-address | include-network | pe-
riod | ping-ranger | search | seed-node | start | tcp-service | tcp-timeout ]
no discovery [ auto-manage | auto-poll | exclude-network | ignored-address | include-network |
period | ping-ranger | search | seed-node | start | tcp-service | tcp-timeout ]
Syntax Description
auto-manage
auto-poll
exclude-network
ignored-address
include-network
period
ping-range
ZoneRanger 5.5 User's Guide
TACACS+ key to use in this server group
Deletes the TACACS+ key
zr# access-control-server-group acgroup
zr(server-group)# group-entry rgateway tac1 49 1812 1813
zr(server-group)# tacacs insert-ip
zr(server-group)# tacacs key secretkey
zr(server-group)# exit
zr# arp
.
Automatically manage newly discovered devices
Automatically poll newly discovered devices
Networks excluded from discovery
Addresses ignored in discovery
Networks included in discovery
Periodically perform discovery
Ping ranges to discover
244