Creating A Preset Table - HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual

8
Removing a function element from the Inspector
8.3.3

Creating a preset table

You can access the preset table on the status bar. The preset table contains the
absolute positions of the presets with respect to the reference mark. You can save
a maximum of 99 presets in the preset table.
Figure 22: Preset table with absolute positions
1 Designation
2 Coordinates
Edit preset table
3
124
Drag the function element to the right
Tap Delete
The function element is removed from the Inspector
1
3
2
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
Setup | Single steps for setup