Fax Defaults - Xerox DocuCentre SC2020 User Manual

Fax Defaults

Purpose: To modify the defaults for the [Fax] menu.
Notes:
• The FAX service cannot be used unless you set up a region code under [Region].
• Bold values are the factory default menu settings.
Resolution
Purpose: To specify the scan resolution to improve the output quality.
Values:
Standard
Fine
Super Fine
Photo
Note: Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the
receiving device.
2-Sided Scanning
Purpose: To scan both sides of a sheet of paper.
1-Sided
2-Sided Binding of
Original
This item is available only when [2-Sided Scanning] is set to [2-Sided Printing] in the [Scan Defaults] menu.
Lighten/Darken
Purpose: To adjust the density to make the copy lighter or darker than the original.
Suitable for documents with normal sized characters.
Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Suitable for documents containing extremely fine detail. The Super Fine
mode is enabled only if the remote device also supports the Super Fine
mode. See the notes below.
Suitable for documents containing photographic images.
Long Edge
Binding
*
Short Edge
Binding
Scans one side of a document.
Scans both sides of a document to be bound by long
edge.
Scans both sides of a document to be bound by short
edge.
® ®
Xerox DocuCentre SC2020
User Guide
Tools
204