General settings
Step by step
egj
dlk
98
General settings
Music on Hold
You can enter music for external calls that are placed on
hold (MOH) using a music source:
•
Internal: The caller on hold hears music generated
by the system;
•
External: The caller hears music from an external
music source (e.g., a radio) connected directly to the
system's external music input;
•
External connected to an extension: The caller hears
music from an external music source (e.g., a radio)
connected to an extension.
In order to accomplish this, add extensions in two MOH
groups or do not assign any extension.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
d . h
Enter the code for a music source:
d
= No music
e
= Internal - MIDI (default)
f
= Internal - WAVE
g
= External
h
= External – extension
w
Initial status for programming mode.
Assigning extensions to MOH groups
Extensions can be grouped in two MOH groups.
No extensions configured as a default.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
Code 136 is used when there is no MOH group
assigned to the extension.