Programming An Extension; Pickup Groups; Alert Ring Timeout For Pickup Groups - Siemens HiPath 1100 Series Programming Manual

Step by Step
...
0 1
...
0 1

Programming an Extension

Pickup Groups

Extensions can be grouped into a maximum of 16
Pickup Groups. This allows an extension to answer calls
that ring at other extensions belonging to the same
Pickup Group.
Required: Programming Mode must be active (*95
31994).
4 3 Enter the code for programming.
Enter the number of the Pickup Group (01 to 16).
1 6
...
Configure extensions for a Pickup Group (e.g., 11/101).
Press this key.
#
Initial state for Programming Mode.
Deleting Extensions from a Pickup Group
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
4 3
Enter the number of the Pickup Group (01 to 16).
1 6
*
Delete the extensions in the call Pickup Group.
Press this key.
#
Initial state for Programming Mode.

Alert Ring Timeout for Pickup Groups

If a call is not answered within a specified period of
time, a short alert ring is sent to the Pickup Group (see
also Pickup Groups).
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 3 5
You can also add extensions to an existing Pickup
Group.
Programming an Extension
43