Table of Contents
Advertisement
Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619
Appendix
Maintenance
Simply wipe the base station and handset with a damp cloth or an
antistatic wipe. Never use a dry cloth as this can cause static dis-
charge!
Troubleshooting
If your telephone does not behave the way you want it to, first try to
solve the problem using the following list.
Fault
No
display.
No reaction to key-
stroke.
No radio connec-
tion to the base
station – all dis-
plays flashing.
Handset that is in
the base station is
not charging.
Handset/base sta-
tion does not ring.
Units/call charges
are not displayed.
Call charges are
not displayed
Your caller on the
telephone cannot
hear you.
anha.fm
Possible cause
Handset not
activated
Batteries empty
Keypad protection
activated
Handset outside the
base station range.
Handset not
registered
Base station not acti-
vated
Line seized by a sec-
ond handset for a
long period.
Ringer off
There is no call
charge pulse.
Price per unit =
00.00
The
INT
key was
pressed – the micro-
phone is "muted" .
11.06.01
Appendix
Solution
Hold down the end call
key
for 1 second
Charge or replace the
batteries (see page 7).
4
Hold down the
key
for 1 second
Move closer to the base
station.
Register the handset
(see page 35).
Check the connector at
the base station (see
page 6).
Maximum charging pow-
er is only possible while
nobody is making calls.
Activate the ringer
(see page 45/page 49).
Request call charge pulse
transmission from your
network provider.
Set the price per unit
(see page 33)
Press
GO BACK
OK
re-activate the micro-
phone.
to
53
Hide quick links:
Advertisement
Table of Contents
