Forwarding Calls; Using Forwarding (Hicom 300 E/300 H); Using Fixed Call Forwarding - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
Store
Call forwarding
Call forwarding
qfe
or
n
or and
Store

Forwarding calls

Using forwarding (Hicom 300 E/300 H)

Using fixed call forwarding

Fixed call forwarding can be activated in a matter of sec-
onds. It is advisable to use this type of call forwarding in
order to reroute calls to the mailbox or to a permanent
deputy, for example.
Storing/changing a destination
n
Lift the handset.
Press the key. The lamp lights up.
Press the key.
Press the key again.
Without pressing the keys first:
qhm
UK code or Standard code.
If the "store" and "call forwarding" keys are not config-
ured on your telephone:
qij
Lift the handset and enter the special code (not for UK).
p
Enter the number of the destination.
Press the key. The lamp goes out.
t
If you have already lifted the handset and entered the
special code:
Replace the handset.
Fixed call forwarding is activated immediately.
If your line is also accessible at other telephones,
the relevant line keys are all affected by the call
forwarding function.
Forwarding calls
33