Using The Remote User Interface (Ui) - Christie CP4415-RGB Gen2 Installation And Setup Manual

Mode
Projector on
Light source on
Standby
IMB powered in Standby

Using the Remote user interface (UI)

Use the remote user interface (UI) to access projector functionality.
1. Log into the Remote UI.
The default IP address is 192.168.206.110.
2. From the Remote UI default page, to access the main projector user interface, select the
Projector Control tab.
3. To upload and download files from the projector, use the File Menu.
Examples of items that can be uploaded include:
• Projector upgrade packages
• Backup packages to restore from
• Rental files to license the projector for Rental mode
• Test patterns (PNG files only)
• Gamma files
Examples of items that can be downloaded include:
• Projector backup files
• Projector certificates (required for content decryption)
• Interrogator files (for support and troubleshooting)
4. If the projector has a GDC IMB SR-1000 installed and configured, access the GDC IMB Web UI
by using the Media Block tab.
CP4415-RGB and CP4420-RGB Gen2 Installation and Setup Guide
020-103773-01 Rev. 1 (02-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
• CineLife+ electronics and light engine are on
• Laser optical subsystem (LOS) is off
• Integrated Media Block (IMB) is on
• CineLife+ electronics and light engine are on
• LOS is on
• Fans run at full speed
• IMB is on
• CineLife+ electronics remain on standby with the light engine off
• Fans and LOS are off
• IMB is off—IMB automation does not function
• Turns on the IMB
• Increases the air flow inside the projector to cool the card cage electronics
Installing and setting up
29