Rgb400 Active Loop-Thru Input Module 38-804607-Xx; Pc250 Analog Input Module 38-804609-Xx; Dvi Input Module 38-804635-Xx - Christie RPMX-D132U User Manual

Appendix D: Optional Input Modules
D.3 RGB400 Active Loop-Thru Input Module 38-804607-xx
The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal Switcher, or a Marquee
Case/Power Supply. The module receives analog RGB input signals from computers or other RGB source
devices. Video inputs are 75Ω terminated. Video outputs provide buffered loop-through to another display
device.
RGB400ALT Features
‡accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate horizontal and vertical sync)
‡BNC connectors for RGB signal inputs
‡buffered loop-through video outputs
NOTE: The audio connectors are not functional.
D.4 PC250 Analog Input Module 38-804609-xx
The PC250 Analog Input Module may be installed in this projector, a Marquee Signal Switcher or a Marquee
Case/Power Supply. The module receives analog RGB input signals from IBM PC compatibles or Macintosh
computers. Video inputs are 75
display device.
PC250 Analog Features
‡accepts VGA or MAC RGB video
‡15 pin D connectors for video
‡active loop-through video outputs
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously.
2) The audio connectors are not functional.
3) Trademarks are the rights of their respective owners.
D.5 DVI Input Module 38-804635-xx
This module can display digital video input signals conforming to the DVI (Digital Visual Interface) single-
channel standard.
D-2
Ω terminated. Video outputs are provided for buffered loop-through to another
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
020-100245-03 Rev. 1 (11-2010)