Chrysler 2005 Crossfire SRT6 Service Manual page 146

3 - 30 PROPELLER SHAFT
4. Remove the rear transmission tunnel support
bracket bolts (1) and the bracket.
5. Support the transmission with a jack stand.
6. Remove the transmission mount bolts (1).
7. Remove the transmission crossmember bolts (2).
8. Remove the transmission crossmember from the
vehicle.
Note: Mark the location of the front and rear pro-
peller shaft flange to the transmission output
flange and the rear axle pinion flange to maintain
proper balance of the driveline. Mark each bolt
and its location so that each bolt is installed to its
original position.
9. Remove the three rear propeller shaft bolts (1)
from the rear axle pinion flange.
10. Remove the rear propeller shaft from the rear axle
pinion flange.
11. Remove the three front propeller shaft bolts from
the transmission output flange.
12. Remove the front propeller shaft from the trans-
mission output flange.
ZH