6.6 Positioning and Entrance Actuator Rollers Replacement
1. Open the front cover.
2. Remove the toner catch pan and the duplex paper actuator [A] (1 snap ring - M3).
- Positioning Roller -
3. Remove the positioning roller [B] together with the drive belt [C] (1 snap ring).
NOTE: When installing the new positioning roller, make sure that the drive belt fits snugly in
the grooves of the pulleys.
- Entrance Actuator Roller -
4. Remove the entrance actuator roller [D] together with its axle plate [E] (2 shoulder
screws).
5. Separate the actuator roller from the axle plate (1 E-ring).
5-45
31 August 1989