Delayed Send; Print From Usb Defaults; Sided Printing - Fuji Xerox DocuPrint CM405 df User Manual

• Delayed Send

Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once Delayed Send mode is
activated, your printer stores all of the documents to be faxed into its memory and sends them at the specified time.
After faxing in the Delayed Send mode is complete, the data in the memory is cleared.
Values:
21:00*/9:00PM*
0:00 – 23:59 /
1:00 – 12:59AM/PM
NOTE:
• A maximum of 19 delayed fax jobs can be stored in this printer.

Print from USB Defaults

To modify the defaults for the Print from USB menu.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Output Color
Purpose:
To specify whether to print in black and white or in color.
Values:
*
Full Color
Black & White
• Select Tray
Purpose:
To specify the input tray.
Values:
Bypass Tray
*
Tray1
Tray2
NOTE:
• Tray2 is available only when the optional 550 sheet feeder is installed.
• 2 Sided Printing
Purpose:
To print on both sides of a sheet of paper.
Values:
1 Sided*
2 Sided Binding of Output
Specify the fax transmission start time when sending a fax at a specified time.
Prints in color.
Prints in black and white.
The paper is fed from the bypass tray.
The paper is fed from the standard 550 sheet tray.
The paper is fed from the optional 550 sheet feeder.
Long Edge Binding
Short Edge Binding
Prints on one side of a sheet of paper.
*
Prints on both sides of a sheet of paper to be bound by
long edge.
Prints on both sides of a sheet of paper to be bound by
short edge.
Using the Operator Panel Menus and Keypad
331