When Not Using A Receiver - Fuji Xerox ApeosPort-II C4300 User Manual

4 Fax

When Not Using a Receiver

1
Adjust the volume of the line monitor.
We recommend setting the volume of the line monitor to [Loud] so that it is easy to
hear the voice prompts.
For information on how to change the volume of the line monitor, refer to "Line Monitor Volume"
(P.275)
2
Select [On-hook (Manual Send/
Receive)] on the [Advanced
Features] screen.
3
Select [Manual Receive].
4
Specify the fax number of the facsimile information service.
The call destination can be specified using the numeric keypad address numbers, or
4
one touch buttons. The address book cannot be used.
The call destination can be
specified also with the keyboard
displayed by pressing
[Alphanumeric] or [Symbol]
button.
Note
5
When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
6
When input is finished, press the <Start> button.
164
• When the line type is set to a
pulse line, [Tone (:)] does not
appear.
• If you want to send tones (or to use the touch-tone services) while using a pulse line, select
[Tone (:)].
• Some touch-tone services may not be available even if you set your telephone to send
tones.