10.01 Voice Mail Integration
Description
Programming
(Dumb programming mode)
The KX-TD500 system can forward callers directly to the called
extension's mailbox of the Voice Processing System, if the caller is
forwarded to a Voice Mail port (all calls, busy or no answer) and this
feature is enabled by the extension user.
The KX-TD500 system automatically sends the digits of mailbox number
of the called extension with DTMF tones to the Voice Mail port before
connecting the caller.
These digits are commonly known as the Follow on ID.
A max of 16 extension ports (SLC/MSLC/ESLC/HLC/DHLC card) of the
KX-TD500 system can be programmed for connection to the Voice
Processing System KX-TVP150.
This feature applies to the following calls.
Calls transferred by :
• Call Forwarding — All Calls
• Call Forwarding — Busy/Off-hook
• Call Forwarding — No Answer
• Call Forwarding — Busy/No Answer
(including the calls transferred to the extensions on which one of the
above mentioned Call Forwarding feature is assigned.)
• Intercept Routing — No Answer (IRNA)
(including the transfer recalled outside call and held reminder outside
call)
Extensions assigned as Voice Mail port are not allowed to connect to
each other. For example, an Automated Attendant port is not allowed to
connect to another Voice Mail port.
1) Press CTRL key and V key simultaneously when Main Menu
screen is displayed at VT programming mode.
2) Enter P
R
G and press Return key when Dumb programming
mode initial prompt ( ; > ) is displayed. Then programming mode initial
prompt ( ; PRG > ) is displayed on the screen.
3) Program the required items as follows:
3-F-20