Panasonic KX-TD500 System Reference Manual page 307

4. Call Forwarding and Station Hunting
4.3
Ext./CO
* 1
* 2
* 3
(continued)
FWD to a non-VPS extension
(Both VPS and non-VPS extensions are members of a hunting group)
Ext.1
FWD mode
The call hunts for both VPS and non-VPS extensions in a hunting group
following the programmed order.
(FWD-All/Busy)
Call State
Ringback Tone
(The call is arriving at Ext.2)*
Ringback Tone
(The call is forwarded to the
VPS 1 and arriving on it.) *
Ringback Tone
(The call is arriving at Ext.3) *
Busy Tone * 3
In case of outside calls (DIL 1:1, DISA,DID)
In an incoming outside call is not answered by the extension in a specified time
period (IRNA timer), it will be transferred to another destination. — IRNA
Refer to "6. Intercept Routing No Answer (IRNA)" and "7. IRNA and Station
Hunting" on pages 3-F-52 through 3-F-55 for further information.
The KX-TD500 system sends the "Forward to VM Sequence" when the VM
extension answers the call.
The treatment of calls differs depending on the types of calls.
Refer to "5. Treatment of the call forwarded to the busy extension/VPS" on page
3-F-51 for further information.
3-F-47
Hunting
Forward
Ext.2 Hunting Group
Hunting
Conditions
The Ext.2 is idle.
1
The Ext.2 is busy but the
VPS 1 is idle.
2
The Ext.2 and VPS 1 are
1 busy.
The Ext.3 and the VPS 2
are idle.
All members of a hunting
group are busy.
VPS 2
Hunting
Ext.3
Hunting
VPS 1