Cam Chain Tensioner Lifter Inspection; Cam Chain Tensioner Lifter Installation - Honda 2010 CRF250R Service Manual

CYLINDER HEADNALVES
INSPECTION
Check the lifter
operation:
- The tensioner shaft should not go into the tensioner
lifter body when it is pushed .
- When it is turned clockwise with a screwdriver, the
tensioner shaft should be pulled into the tensioner
lifter body. The tensioner shaft should spring out of
the tensioner tifter body as soon as the screwdriver
is released.
INSTALLATION
LIFTER
Insert the cam chain tensioner holder Into the cam
r~:!~;;---:=
chain tensioner lifter.
Turn the cam chain tensioner holder clockwise fully and
lock the cam chain tensioner lifter by pushing the
handle.
TOOL:
Cam chain tensioner holder
070MG-001 01 00
or
07AMG-001A100
(U .S.A. only)
Install a new gasket and cam chain tensioner tifter.
Install and tighten the bolts securely.
Remove the tensioner holder.
BOLTS
SCREWDRIVER
GASKET
C».~
..
...
Install the cam chain tensioner lifter boll with a new ::::::':::: ....
~:::::::: ~,---------"
sealing washer.
Tighten the cam chain tensioner lifter bolt securely.
After
·1 2
only·
Install the condenser (page 16-16).
8-36