Engine Stop Switch Inspection; Switch Inspection; Switch Line Inspection - Honda 2010 CRF250R Service Manual

ELECTRICAL SYSTEM
ENGINE STOP SWITCH INSPECTION
Disconnect the engine slop switch 4P (Natural) , - - -.,
connector.
SWITCH INSPECTION
Check for continuity between the Black/white and Redl , - - - - - - - - , - - - --
yellow wire terminals of the engine slop switch side.
There should be continuity with the engine stop switch
pushed, and no continuity wi th Ihe switch released.
SWITCH LINE INSPECTION
EN<"NE STOP
SWITCH
BIIW
RfY
Hang the fuel tank to the left side of the frame (page
3- P;;=-----EE"C;M;-;:33;;P;-;e~CX)c;;;;;~;;:c;;l
61.
Disconnect the ECM 33P (Black) connector.
Check for continuity between the ECM 33P (Black) and
~=="'''''''''::313P'''''(B : LA ""= C '" K '' I ~ C ~OIN" N ~ E ~ C ~ T O ~ R~
engine stop switch 4P (Natural) connectors of the wire
harness side. (wire side/female terminal)
TOOL :
Test probe
07ZAJ·RDJA 110
Connection: Bla ck/white - Black/wh ite (19)
There should be continuity.
If the engine stop switch and switch line are normal,
check for ECM power/ground hne (page 5-58).
Q
811W (19)
BIIW
4P(NATURAL)CONNECTOR
(wire side/female terminal)
16-15