Handlebar Removal - Honda 2010 CRF250R Service Manual

FRONT WHEEUSUSPENSION/STEERING
Route the front
brake hose properly
(page 1-21).
Apply locking agent to the brake caliper mounting bolt
threads.
Install the fronl brake caliperfbrackel assembly and
brake caliper mounting bolts.
Tighten the fronl brake caliper mounting bons to the
specified torque.
TORQUE : 30 N'm (3.1 kgf-m, 22 IbHt)
Inslall the brake hose clamp and bolts.
Tighten the bolls securely.
Install the fronl wheel (page 13-12).
Inspect the wear rings for wear or damage.
Replace the wear ring,
if it is 1.5 mrn
(0.06 in) or fla t
with the outer tube.
Make sure that the wear ring end gaps face rearward.
HANDLEBAR
REMOVAL
13-36
Remove the number plate (page 2-5).
Remove the handlebar pad from the handlebar.
Remove the wire bands.
OUTER TUBE
1.5 mm (0.06 in )
WEAR RING
'10 shown: HANDLEBAR PAD