Shock Linkage Removal; Shock Linkage Disassembly - Honda 2010 CRF250R Service Manual

REAR WHEEUSUSPENSION
Install the rear shock absorber upper mounting bolt by
aligning cut-outs of the frame and upper mounting bolt.
c..::.:.::..:..1
Install and tigh ten the shock absorber upper mounting
nut to the specified torque.
TORQUE : 44 N'm (4.5 kgf'm, 32 1 bHt)
lnstalilhe sub-frame (page 2-8).
SHOCK LINKAGE
REMOVAL
Remove the nut and lower drive chain roller.
Remove the following:
- Shock absorber lower mounting bolUnut
Shock arm bolUnutJwasher (shock link side)
Shock
arm
bolUnut/washer (swlngarm sIde)
Shock arm
Shock link bolt/nutlwasher (frame side)
Shock link
DISASSEMBLY
Remove the side collars and pivot collars from the
shock arm (swingarm side, shock link side).
MOUNTING
BOLT{NUT
I • •
ARM
/
I
SHOCK ARM
PIVOT COLLARS
•
,I
14·31