Clutch Outer Guide; Needle Bearing; Clutch Lifter Lever; Lifter Lever Bearing Replacement - Honda 2010 CRF250R Service Manual

CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
CLUTCH OUTER GUIDE
Check the clutch outer guide for abnormal wear or
damage.
NEEDLE BEARING
Check the needle bearing for wear or damage.
Check the mainshaft for wear or damage at the sliding
surface of the clutch outer guide.
CLUTCH LIFTER LEVER
Check the clutch lifter lever for damage.
Check the oil seal and needle bearings for wear or
damage.
If
necessary , remove
the oil seal and replace the
bearings as follows.
LIFTER LEVER BEARING REPLACEMENT
Remove the engine from the frame (page 7-4).
Remove the cam chain tensioner lifter (page 8-35).
Remove the clutch (page 10-7 ).
Remove the lifter lever needle bearings using Ihe
special tools.
TOOLS :
Bearing remover set, 12 mm 07936· 1660101
- Remo ver weight
- Remo ver head , 12 mm
- Remo ver s haft
TOOLS, U.S.A . only:
Bearing remo v er, 12 mm
Remo ver handle
Remover weight
not available in U.S.A.
07741-0010201
07936· 1660110
not available in U.S.A .
07936· 1660120
not available in U.S.A .
07936·166010A
07936·3710100
07936·371020A
NEEDLE BE.'RING
CLUTCH
GUIDE
CLUTCH
LlFT~ E ~R~L~ E~ V ~ E ~RTU~~EB~;;;;~l
NEEDLE BEARINGS
10-11