Honda 2010 CRF250R Service Manual page 237

'10:
After '10:
CLUTCH/KICKSTARTERIGEARSHIFT LINKAGE
Coat the clutch plates and discs with engine oil
Install the eight clutch discs and seven clutch plates
alternately, starting with a disc.
Install the spring seat and judder spring as shown ,
Coat the clutch discs lining surfaces with clean engine
oil.
Install the clutch disc A (large I.D.), seven clutch plates
and seven clutch discs B.
Insert the dutch lifter rod into the malnshaft.
Inslalilhe clutch lifter assembly,
Instalilhe clulch pressure plate.
Install the five springs and spring bolls ,
Tighten the bolts to the specified torque in a criss-cross
pattern in two or three steps,
TORQUE:
12 N'm
(1.2
kgf'm,
9
IbHtl
'10;
CLUTCH PLATES
O=---==::::OCL;;;U~T>lJC'l'H
DISCS ,
I
Aft" 'to,
--;>II
CLUTCH PLATES
W
_ ~
SPRING
~ II
SEAT
JUDDER
SPRING
CLUTCH '
DISC A
CLUTCH DISCS
;7J
10-15