Swingarm Removal - Honda 2010 CRF250R Service Manual

REAR WHEEUSUSPENSION
'10,
'11: Install the drive chain lower roller with the
~_.
mark side
facing oul.
Ahar" f :
InslaUthe drive chain lower roller as shown.
Install and tighten the nut to the specified torque.
TORQUE: 12 N'm (1 .2 kgf'm , 9lbHt)
SWINGARM
REMOVAL
Raise the rear wheel off the ground by placing a
r::::-::-~~--""''T---;:B~ O ~ L~ T /N ~ U ~T ~N/=A~ S~ H:;: ER
workstand or equivalent under the engine.
(SWINGARM SIDE)
14·36
Remove the following:
- Rear wheel (page 14-7)
- Drive chain (page 3-18)
- Brake pedal pivot bolt (page 15-29)
Remove the shock arm nUl, washer and bolt (swingarm
side).
Remove the screws and brake hose guides.