Glass Wool Replacement - Honda 2010 CRF250R Service Manual

Do
not overtighten
the vise
as
this will
distort the muffler
mount stay.
FRAME/BODY PANELS/EXHAUST SYSTEM
GLASS WOOL REPLACEMENT ('10)
Remove the muffler (page 2-9).
Sellhe muffler in a vise with pieces of wood or soft jaws
to avoid damage.
Remove the rivets with a 4.0 mm and 10 mm drills using
the following procedures:
1. Drililhe rivet head with a 4.0 mm dnll to the specified
depth as shown.
2. Drililhe rivet head with a 10 mm drill so thallhe rivet
can be removed into the muffler body, then remove
the rivet.
NOTE
Be careful not to damage the muffler body.
Remove the following:
- Front pipe
- Glass wool
- Muffler body
- End cover
- Center glass wool
- Inner pipe
Clean off the sealant from the muffler body, front pipe,
end cover and inner pipe.
MUFFLER
4.0 mm
FRONT PIPE
CENTER
GLASS WOOL
\
GLASS WOOL
INNER PIPE
RIVETS
/
_09®
®
®
10mm
END COVER
GLASS WOOL
2-11