Clutch Lever Removal/Installation - Honda 2010 CRF250R Service Manual

FRONT WHEEUSUSPENSION/STEERING
Move the steering slem lock-Ie-lock several times to
seat the bearings.
Loosen the steering stem adjusting nut fully.
NUT
Retighten the steering stem adjusting nut to the
iII!~i!'!~~~~~~~~~~~~;;;~~=
specified torque using the special 1001 while holding the
!
steering slem.
TORQUE : 7.0 N-m (0 .7 kgf-m , 5.2IbHt)
TOOL:
Steering stem socket
07916-3710101
Recheck that the steering stem moves smoothly wi thout
play or binding.
Install the following:
Fork top bridge
- Fork legs (page 13-34)
- Washer and steering stem nut
Tighten the sleering stem nut to the specified torque.
TORQUE: 108 N-m (11 .0 kgf'm , 80 IbHt)
Recheck the steering stem adjustment before installing
the removed parts.
Install the remaining removed parts
in the reverse order
of removal.
TORQUE :
Front
brake hose guide bolt:
5,2 N'm (0.5 kgf'm , 3,8 IbHt)
CLUTCH LEVER
REMOVAUINSTALLATION
Release the clutch lever cover,
Remove the clutch lever pivot nut and bolt.
Remove the clutch lever by releasing the clutch cable.
13-56
'10 shown; NUTIWASHER