Quick Connect Fitting Removal; Fuel Pump Side - Honda 2010 CRF250R Service Manual

FUEL SYSTEM (PGM·FI)
QUICK CONNECT FITTING REMOVAL
FUEL PUMP SIDE
Release the rubber cover and remove the quick FITTING COVER
u
"
connect filling cover.
_~
1. Relieve the fuel pressure (page 5-30).
I
2. Check the fuel quick connect filting for dirt, and
======-
clean If necessary.
Place a shop towel over the quick connect fitting.
3. Hold the oonnector with one hand and squeeze Ihe
retainer tabs with the other hand to release the
locking pawls.
pun the connector off, then remove the retainer from
Ihe fuel joint
Absorb the remaining fuel in the fuel hose with a
shop towel.
Be careful not to damage the hose or other parts.
Do not use tools.
If the connector does not move, keep the retainer
tabs pressed down, and alternately pull and push
Ihe connector until it comes off easily.
CONNECTOR
'~
4. To prevent damage and keep forelQn matter out,
cover the disconnected connector and fuel joint with
plastic bags .
PLASTIC BAGS
RUBBER COVER
~
RETAINER TABS
LOCKING PAWLS
5-31