Flywheel Removal; Flywheel Installation - Honda 2010 CRF250R Service Manual

FLYWHEEL
REMOVAL
Be careful nor to
bottom the adapter
against the
crankshaft left end.
or
it
may damage
the oil control
orifice.
Remove the lett crankcase cover (page 11-4).
Hold the flywheel with the special tool and remove the
nut and washer.
TOOL:
Flywheel holder
07725·0040001 or
07 AMB·MENA 1 00
(U.S.A. only)
Screw the speCiatlool onto the crankshaft.
TOOL:
Flywheel puller adapter
TOOL, U.S.A. only:
070MG·KSE0100
Not available in
U.S.A.
Thread protector 07AMC·MEBA110
(This thread protector is included with
07AMC·MEBA100
or can
be ordered sepa rately)
Attach the special tool on the flywheel, then remove it
TOOL:
Flywheel puller
070MC·HP1 01 00
0'
070MC·HP1 A 100
(U.S.A. only)
Be
careful not
10 Remove the woodruff key.
damage the
crankshaft.
INSTALLATION
Clean any oil from the tapered portion of the crankshaft
and flywheel.
Be careful not to
Install the woodruff key in the groove in the crankshaft.
damage the
crankshaft.
ALTERNATOR
11-5