Seat Removal/Installation; Side Cover Removal/Installation - Honda 2010 CRF250R Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
SEAT
REMOVAL/INSTALLATION
Remove the seal mounting bolls.
Remove the seat by pulling
it
backward.
Align the seal hook with the seat bracket on the fuel SEAT
tank and seat prong with the ECM stay.
Install and lighten the seat mounting bolts to the
specified torque.
TORQUE: 26 N-m (2.7 kgf'm , 191bHt)
BRACKET
SIDE COVER
REMOVAL/INSTALLA nON
Remove the seal mounting bolt.
Remove the side caver bolt and side cover.
'10 shown:
HOOK
ECM STAY
Be careful not
/0
Install the side cover by inserting the side cover tabs
damage the labs.
into the air cleaner housing cover and seat as shown .
SEAT MOUNTING BOLT
Install and lighten the side cover bolt to the specified
torque.
TORQUE: 10 N'm (1.0 kgf'm , 7 IbHt)
Install and tighten the seat mounting bolt to the
specified torque.
TORQUE: 26 N'm (2.7 kgf'm , 191bHt)
PRONG
BOLTS
SIDE COVER
~
TABS
COVER BOLT
~
2-3