Honda 2010 CRF250R Service Manual page 323

FRONT WHEEL/SUSPENSION/STEERING
Remove the screw, holders and engine stop switch .
Remove the bolls , clutch lever bracket and holder.
Remove the handlebar grip .
Do not disconnect
Remove the bolts, front brake master cylinder holder
the hydraulic Ime.
and master cylinder.
Keep the brake
master cylinder
upright to prevent
air from entering
the hydraulic
system.
Remove the throll!e housing as an assembly as follows:
Loosen the throttle housing bolts, turn the handlebar to
the right fully, then remove the throttle housing.
If you will disassemble the throttle housing
, remove the
throttle housing dust cover and throttle housing bolts.
HANDLEBAR GRIP
MASTER
13-37