Cam Chain Tensioner Lifter - Honda CBR650F Service Manual

dummyhead dummyhead
CYLINDER HEAD/VALVES

CAM CHAIN TENSIONER LIFTER

REMOVAL/INSTALLATION
• The cam chain tensioner lifter can be serviced with
the engine installed in the frame.
Remove the sealing bolt [1] and sealing washer [2].
Turn the cam chain tensioner lifter shaft fully in
(clockwise) and secure it using the special tool.
TOOL:
[3] Tensioner stopper
Remove the cam chain tensioner lifter mounting bolts
[4].
Remove the cam chain tensioner lifter [1] and gasket
[2].
Installation is in the reverse order of removal.
• Replace the gasket and sealing washer with new
ones.
INSPECTION
Check the cam chain tensioner lifter [1] operation:
– The cam chain tensioner lifter shaft [2] should not go
into the cam chain tensioner lifter body when it is
pushed.
– When it is turned clockwise with a tensioner stopper
or a screwdriver [3], the cam chain tensioner lifter
shaft should be pulled into the cam chain tensioner
lifter body. The cam chain tensioner lifter shaft
should spring out of the cam chain tensioner lifter
body as soon as the stopper tool is released.
10-20
[1]
070MG-0010100
[2]
[3]
[4]
[1]
[2]
[2]
[1]
[3]