Honda 2010 CRF250R Service Manual page 311

FRONT WHEEL/SUSPENSION/STEERING
Coal the guide bushing and slider bushing with
recommended fork oil (page 13-26), and install the fork
slider into the outer tube.
FORK SLIDER
-
OUTER TUBE
Drive in the guide bushing together with the back-up
~==T=1r;,;:::;;;;;;;;=------:===~
ring into the outer tube using the special 1001. BACK-UP RING
Drive the oil seal into the outer lube using the special
tool.
TOOL:
Fork seal driver, 48.2 x 58 mm 070MO-MEN0100 or
070MO-MENA 100
(U.S.A. only)
Install the stopper ring into the groove in the outer tube.
Drive the dust seal into the outer lube using the special
tool.
TOOL:
Fork seal driver, 48 .2 x 58 mm 070MD·MEN0100 or
070MD-MENA10Q
(U .S.A. only)
GUIDE BuLG
I
STOPPER RING
DUST SEAL
13-25