Front Wheel Installation - Honda 2010 CRF250R Service Manual

FRONT WHEEUSUSPENSION/STEERING
'10 - '12 only: Check the brake disc cover for wear or damage.
Replace
it
if necessary.
Install the brake disc cover to the left wheel hub.
After
'12
only:
Check the left side collar for wear or damage .
13-12
Install the side collar to the left wheel hub.
INSTALLATION
Clean Ihe clamping surface of Ihe axle shaft and axle
holders.
Install the front wheel between the fork legs so that the
brake disc is positioned between the pads. being
careful nollo damage the pads.
Apply
a thin coal
of grease to Ihe axle shaft surface.
Insert Ihe axle shaft from Ihe right side.
Inslall and lighten the axle nul to the specified torque
~~~§~~~~~~~&~~~~~~i
while holding the axle shaft.
~
TORQUE : 88 N'm (9.0 kgf'm , 65 Ibf-ft)
Tighten the left axle holder bolts to Ihe specified torque.
TORQUE : 20 N·m (2.0 kgf·m , 15 IbHt)