Alternator Service Information; Alternator Torque Values; Alternator Tools - Honda 2010 CRF250R Service Manual

SERVICE INFORMATION
GENERAL
ALTERNATOR
This section covers service of the alternator stator and flywheel. All service can be done with the engine installed In the frame.
Engine lubricating oil is fed through the alternator cover. Clean the oil passage before installing the alternator cover.
For alternator inspection (page 16-9).
For CKP sensor inspection (page 16-6).
TORQUE VALUES
Flywheel nul
CKP
sensor mounting
bolt
Stator mounting socket boll
Left crankcase cover bolt
TOOLS
Flywheel holder
07725-0040001
~.¥'
~F~
,~'-<-
. " ,
64 N "m (6 .5 kgf-m , 47 Ibf·ft)
5.2 N"m (0.5 kgf-m . 3.8 IbUt)
5.2 N "m (0.5 kgf-m . 3.8 Ibf-ft)
12 N "m (1.2 kgf-m . 9lbHt)
Flywheel puller
07QMC-HP1 01 00
o
or 07AMB-MENA 100 (U.S .A. only) or 070MC-HP1A10D (U.S.A. only)
C-TTh~, ~ e~a"d~ p~ro"'e ~'~t~ o , c----------------+--------
07AMC-MEBA110 (U.S.A. only)
NOTE :
This thread protector is included with
07AMC-MEBA100 or can be ordered
separately
Apply engine oil to the threads and seating
surface.
Apply locking agent to the threads.
Coaling width: 4.5 ± 1.0 mm (0.18 ± 0.04 in)
Apply locking agent to the threads.
Coating width: 4.5
±
1.0 mm (0.18
±
0.04 in)
Flywheel puller adapter
070MG-KSE0100
Not available in U.S.A .
\
\
11·3