Gearshift Linkage Installation - Honda 2010 CRF250R Service Manual

CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
INSTALLATION
Install the drum pin into the hole on the shift drum.
Install the return spring, washer and stopper arm while
hooking the return spring ends as shown , and tighten
the stopper arm bolt to the specified torque.
TORQUE : 12 N'm (1.2 kgf'm , 9lbHt)
Check the stopper arm for proper operation .
Move the stopper arm oul of the way using a
screwdriver.
Align the shift drum center groove with the drum pin and
install it to the shift drum.
Apply locking agent to the gearshift drum center pin
threads as shown , and install the center pin.
Tighten the shift drum center pin to the speCified torque.
TORQUE : 22 N'm (2.2 kgf'm, 161bHt)
1.0 - 2.0 mm
(0.04 - 0.08 in)
6.5 ± 1.0 mm
(0.26 ± 0.04 in)
10-23