Radiator Shroud Removal/Installation; Engine Guard Removal/Installation - Honda 2010 CRF250R Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
RADIATOR SHROUD
REMOVALfINSTALLA TION
Remove the bolts , coliars and radiator shroud.
Inslallthe radiator shroud by aligning its tab with the air
cleaner housing cover slot.
Install the radiator shroud bolls and coliars.
Tighten the upper side bolts to the specified torque.
TORQUE : 5.0 N'm (0.5 kgf'm, 3.7 IbHt)
Tighten the lower side bolts securely.
ENGINE GUARD
REMOVALfINSTALLATION
2-4
Remove the bolt, collar and engine guard.
Installation is in the reverse order of removal.
NOTE :
Inslall the engine guard by hooking its tab onto the
frame.
TORQUE:
Engine guard bolt:
10 N'm (1.0 kgf-m, 7lbHt)
BOLTS (upper side)
(
SHROUO
SOL TS/COLLARS
(lower side)
TAB
Align
ENGINE GUARD
/COL~R
-
~
-L
\
BOLT