BB
Compressor Clutch Overhaul
Special Tool Required
A/C clutch holder, Robinair 10204, Kent-Moore J37872,
or Honda Tool and Equipment KMT-J33939,
commercially available
1. Remove the center bolt while holding the pressure
plate with a commercially available A/C clutch
holder.
1 3 . 2 N - m ( 1 . 3 5 k g f m , 9 . 7 6 I b f - f t )
/
t
3. If you are replacing the field coil, remove the snap
ring (A) with snap ring pliers, then remove the
pulley (B). Be careful not to damage the pulley and
compressor.
2. Remove the pressure plate (A) and shim(s) (B),
taking care not to lose the shim(s). If the clutch
needs adjustment, increase or decrease the
number and thickness of shims as nesessary, then
reinstall the pressure plate, and recheck its
clearance (see page 21-50).
(cont'd)
21-51