Honda 2002 Accord Manual page 735

9. Pack the outboard joint with the joint grease
included in the new joint boot set.
Grease quantity
Outboard joint (Rubber): 130-140 g (4.6 4.9 oz)
Outboard joint (TPE): 140-150 g (4.9-5.3 oz)
10. Install the outboard boot and boot bands.
• For TPE type boot, go to step 20.
• For rubber type boot, go to step 11.
11. Fit the boot (A) ends onto the driveshaft (B) and
outboard joint (C).
12. Set the new double loop band (A) onto the boot.
A
13. Pull up the slack in the band by hand.
14. Mark a position (A) on the band 1 0 - 1 4 mm (0.4-
0.6 in.) from the clip (B).
(cont'd)
16-17