Valve Body Valve Installation
1. Coat all parts w i t h ATF before assembly.
2. Install the valves and springs in the sequence
s h o w n f o r the main valve body (see page 14-160),
regulator valve body (see page 14-163), and servo
body (see page 14-164). Refer to the f o l l o w i n g
valve cap illustrations, and install each valve cap so
the end s h o w n facing up will be facing the outside
of the valve body.
3. Install all the springs and seats. Insert the spring (A)
in the valve, then install the valve in the valve body
(B). Push the spring in w i t h a screwdriver, then
install the spring seat (C).
C