Honda 2002 Accord Manual page 960

Glass
Quarter Glass Replacement - Coupe {cont'd)
13. W i t h a sponge, apply a light coat of body primer to
the original adhesive r e m a i n i n g around the quarter
glass opening flange. Let the body primer dry for at
least 10 minutes:
• Do not apply glass p r i m e r to the body, and be
careful not to mix up the glass and body primer
sponges.
• Never touch the primed surfaces w i t h your hands.
• Mask off the dashboard before painting the
flange.
; A p p l y b o d y p r i m e r h e r e .
2 8 m m
(1.1 in.)
3 5 m m
(1.4 in.)
14. Before filling a cartridge, cut a " V " in the end of the
nozzle (A) as s h o w n .
7 m m (0.27 in.)
15. Pack adhesive into the cartridge w i t h o u t air pockets
to ensure continuous delivery. Put the cartridge in a
caulking gun, and run a bead of adhesive (A)
around the edge of the quarter glass (B) as shown:
* After applying the adhesive, peel the separator
off the butyl tape.
• Apply the adhesive w i t h i n 30 minutes after
applying the glass primer. Make slightly thicker
bead at each corner.
2 m m
(0.08 in.)
13 m m
(0.51 in
8 m m (0.31 in.)
2 m m
(0.08 i n .
2 m m
(0.08 in
20-58