Wiper/Washer Switch Test/Replacement - Honda 2002 Accord Manual

Wiper/Washer Switch Test/Replacement
• BODY •
1. Remove the dashboard lower cover (see page 20-84) and steering column covers (see page 17-25).
2. Disconnect the connectors (A) from the wiper/washer switch (B).
3. Remove the two screws (C), then pull out the switch (B).
4. Inspect the connector terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
• If the terminals look OK, check for continuity between them in each switch position according to the tables.
- if there is no continuity, replace the switch.
A1 A2 A3 A 4
A5
A7 A 8
W i r e s i d e o f
f e m a l e t e r m i n a l s
T e r m i n a l
P o s i t i o n
A1 A2
A3
A4
A5
A7
A8
B1
B2
O F F
o
I N T
o
• o
o
o
L O
o
- o
HI
o
- o
M i s t s w i t c h O N
o
-o
W a s h e r s w i t c h O N
o
- o
I n t e r m i t t e n t d w e l l t i m e
c o n t r o l l e r t u r n e d
o
0 - 3 0 k 2
- o
22-187