Table of Contents
Advertisement
DB
7. Remove the dashboard (see page 20-90).
8. Remove the heater duct (see page 21-26) or
evaporator (see page 21-46).
9. Remove the m o u n t i n g bolts and the heater unit.
6x 1.0 mm
10. Remove the self-tapping screws and the bracket (A),
then carefully pull out the heater core (B) so y o u
don't bend the inlet and outlet pipes.
11. Install the heater core in the reverse order of
removal.
12. Install the heater unit in the reverse order of
removal, and note these items:
• Do not interchange the inlet and outlet heater
hoses, and install the hose clamps securely.
• Refill the cooling system w i t h engine coolant (see
page 10-10).
• Adjust the heater valve cable (see page 21-30).
• Make sure that there is no coolant leakage.
• Make sure that there is no air leakage.
• Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
21-29
Advertisement
Table of Contents
Troubleshooting
